We recently took this unit apart to track down a persistent leak that was pooling at the base. When a dishwasher isn’t draining or starts leaking, it’s often a mechanical failure in the pump assembly or a worn-out door seal, but in this case, we had to pull the side panels and check the internal hoses and the pressure switch.

We find that most of these issues come down to simple wear and tear on the rubber components or a blockage in the drain line. Our approach is to strip the unit down to identify the exact point of failure rather than just guessing. We replaced the faulty seals, cleared the internal lines, and ran a full cycle to ensure the sensors were reading correctly before putting the panels back on.

If your dishwasher is leaving water on the floor or won’t finish a cycle, it’s usually a specific part reaching its limit. We can usually get these back in working order the same day by focusing on the core mechanical components.