Blomberg 2805310600 washer door lock

Blomberg 2805310600 washer door lock

is a genuine replacement part for Blomberg washing machines, including models WM77120 and WM77110. It ensures the door securely locks before a wash cycle starts and maintains a proper safety interlock during operation. Replacing a worn or faulty door lock can stop common issues like start failures, door lock error messages, and unresponsive doors after a cycle. This helps restore normal washing machine function and improves safety by ensuring the machine only operates when the door is fully and securely closed.

✅ Key Details

Part Number: 2805310600

Compatible Brands: Blomberg

Compatible Models: WM77120, WM77110 (and select other front-load models)
7169581100, 7152381200, 7163081300, 7131681300, 7169581500, 7169581600

Type: Door Lock / Door Interlock Assembly

Function: Secures the washer door during operation and signals the control board that the door is safely locked

Typical Location: Mounted behind the front panel at the door latch opening

The part has been replaced by 2805311400

This part is designed specifically for use in select Blomberg washing machines. Always verify your model number before ordering to ensure proper compatibility.

⚠️ Common Issues This Part Can Solve

Replacing the door lock assembly can resolve several safety and start-related problems, including:

Washer not starting due to door not locking

Door lock or door open error codes on display

Clicking sound when pressing start but cycle does not begin

Door remaining locked after cycle completion

Intermittent start/stop caused by failing door switch

Machine detecting door as open even when fully closed

If power supply, wiring, and door strike are confirmed to be in good condition, a faulty door lock assembly is often the cause.

❓ FAQs (Frequently Asked Questions)

Q: How do I know if my washer door lock is faulty?
A: Common symptoms include the washer not starting, repeated clicking when pressing start, door lock error codes, or the door staying locked after the cycle ends. A technician can confirm with electrical continuity testing.

Q: Is this part difficult to replace?
A: Moderate DIY skill is required. The washer must be unplugged, and in most models, the front gasket clamp needs to be removed to access the lock assembly. Otherwise, you may want to book a professional appliance repair in Vancouver to ensure proper installation and avoid further issues.

Q: Does the door lock need programming after installation?
A: No. This part is mechanical and electrical only and does not require programming.

Q: Can a bad door lock cause other issues?
A: Yes. A failing lock can interrupt cycles, prevent spinning, or stop the washer from draining properly because the control board will not proceed without a confirmed locked signal.

Q: Should I replace the door strike as well?
A: If the plastic strike is worn or damaged, replacing it at the same time is recommended to ensure proper engagement with the new lock.

🛠️ Installation Tips

Disconnect power before starting

Remove the outer door gasket clamp carefully

Support the lock while disconnecting wiring connectors

Test door locking function before fully reassembling the front panel

NOTES:

1. Canceled parts orders are subject to a 25% restocking fee

2. Parts ordered by “Special Order Condition” are not refundable